INTRODUCTION UNDERGRADUATE SESSIONAL DATES STUDENT SERVICES ACADEMIC INFORMATION STUDENT FINANCIAL SERVICES FACULTIES UNDERGRADUATE COURSE INFORMATION FACULTY MEMBERS AFFILIATED UNIVERSITY COLLEGES GLOSSARY NEW MODULES/PROGRAMS FIRST YEAR UPDATES TABLE OF CONTENTS

Electrical and Computer Engineering (E)
 All Engineering courses are available only to students registered in the Faculty of Engineering unless indicated otherwise.
 Electrical and Computer Engineering 2205A/B - Electric Circuits I
Basic resistive circuits, Ohm's, Kirchhoff's Laws. DC analyis: nodal and mesh analysis. Network theorems: linearity, superposition, Thévenin's and Norton's theorems. Time-domain analysis: first and second order circuits, source-free and forced response. Sinusoidal steady-state analysis: phasors, complex power. Basic OpAmp circuitry.
Antirequisite(s):
Corequisite(s): Applied Mathematics 2415
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2208A/B - Electrical Measurement and Instrumentation
Measurements: System of units, errors. Basic resistive circuits: Ohm's, Kirchhoff's Laws; DC analyis: nodal and mesh analysis, superposition, Thévenin's/Norton's theorems; Sinusoidal steady-state analysis: phasors, complex power; Basic OpAmp circuitry; Boolean circuits; Transducers.
Antirequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 2231A/B - Introduction to Electronics
Electronic properties of semiconductors. The P-N junction. Diodes and light-emitting diodes; bipolar and field-effect transistors. Biasing, small signal analysis, large signal analysis. Single transistor amplifiers.
Antirequisite(s):
Prerequisite(s): ECE 2205A/B, Physics 1402A/B or the former Physics 1026.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2233A/B - Circuits and Systems
Introduction to a system level analysis of electrical circuits. The S-Plane and frequency response of circuits, frequency selective circuits, state variables, introduction to Fourier analysis, Fourier transform and Laplace transform techniques. Transfer functions and system functions.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2236A/B - Magnetic Circuits and Transmission Lines
Three phase circuits, magnetic coupling and circuits, transformers. Transmission lines and the telegrapher equation.
Antirequisite(s):
Prerequisite(s): ECE 2205A/B, Applied Mathematics 1413, Physics 1402B or the former Physics 1026.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2238A/B - Introduction to Electrical Engineering
DC circuit analysis, fundamentals of DC circuit analysis, Ohm's Law, KCL, KVL, Thévenin and Norton Equivalent circuits, maximum power transfer; linear analog circuits, diodes, transistors, operational amplifiers, biasing, gain, frequency response.
Antirequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 2240A/B - Electrical Laboratory
Laboratory experiments associated with ECE 2205A/B, as well as laboratory experiments in instrumentation and measurement; the lecture component includes review of laboratory practice, health and safety issues, simulation software, data collecting methods; errors and their calculus; accuracy; averaging, signal conditioning, and data interpolation.
Antirequisite(s):
Prerequisite(s):
Corequisite(s): ECE 2205A/B
Pre-or Corequisite(s):
Extra Information: 1 lecture hour, 3 laboratory hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2241A/B - Electrical Laboratory II
Laboratory experiments associated with ECE 2231A/BECE 2233A/B and ECE 2236A/B; basic semiconductor circuit elements (diodes, LEDs and transistors); second order circuits; sensors and electro-mechanical devices; and a design project.
Antirequisite(s):
Prerequisite(s): ECE 2240A/B
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 1 lecture hour, 3 laboratory hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 2274A/B - Electric Circuits and Electromechanics
This course studies the principles of electrical circuits and components including common electric motors employed in mechanical engineering systems. The course also uses a series of laboratories to introduce the students to common measurement tools used to assess and troubleshoot electrical circuits. The foundations from this course are expanded on in the subsequent course which focuses on electronic components and their application.
Antirequisite(s): ECE 2205A/B, ECE 2231A/B, the former ECE 3373A/B
Prerequisite(s): ES 1036A/B or Computer Science 1026A/B, Physics 1402A/B or the former Physics 1026
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course
 Electrical and Computer Engineering 2277A/B - Digital Logic Systems
Theory of Boolean algebra, switching circuits, Venn diagrams; Karnaugh maps; logic and memory systems, design of combinational and sequential switching machines; electronic switching circuits; data coding, storage, transmission; basic design of digital computers.
Antirequisite(s): The former ECE 3339A/B.
Prerequisite(s): Physics 1402A/B or the former Physics 1026.
Corequisite(s): ECE 2205A/B or registration in Integrated Engineering or Software Engineering Program.
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 2 laboratory hours, 1 tutorial, 0.5 course.
 Electrical and Computer Engineering 3330A/B - Control Systems
The concept of feedbacks; modelling of dynamic systems; characteristics of feedback control systems, performance of control systems in time and frequency domains; stability of feedback systems; control system analysis and design. Using root locus and frequency response techniques.
Antirequisite(s): CBE 3310A/B or the former CBE 4410A/B.
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 3331A/B - Introduction to Signal Processing
Introduction to discrete-time signals and sampled data, linear time-invariant (LTI) systems, frequency response, discrete Fourier transforms, convolution, spectrum analysis, Z-transforms, non-recursive digital filters.
Antirequisite(s):
Prerequisite(s): ECE 2233A/B or MSE 2233 A/B
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 3332A/B - Electric Machines
Basic Principles related to magnetic fields and energy conversion, transformers, DC machines, synchronous machines, induction Machines, special purpose motors.
Antirequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 3333A/B - Electric Power Systems I
Per unit System; three phase transmission systems; three phase transformers; transmission line parameters; steady state operation of transmission lines; maximum power flow; reactive power compensation; economic operation of power systems.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 1.5 tutorial hours, 0.5 course.
 Electrical and Computer Engineering 3336A/B - Electromagnetic Theory
Radio frequency transmission lines, telegrapher's equations, Smith chart. A vector treatment of the theory of electric and magnetic fields. Integral and differential forms of Maxwell's equations. Boundary conditions. Scalar and vector potentials, reflection and transmission of electromagnetic waves in dielectric and conducting media.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 3337A/B - Electronic Circuits
Frequency response in electronic circuits, zener diode and power supply (voltage regulator) circuits, power amplifiers, differential amplifiers, feedback circuits, miscellaneous topics (Miller effect, current mirrors, cascade and cascode circuits, etc.)
Antirequisite(s): The former ECE 2235A/B.
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 3349A/B - Introduction of VLSI
This course covers fundamentals of semiconductor physics as applied to microelectronics, theory of semiconductor materials and devices. Students will be exposed to basic elements of CMOS circuitry design, including practical implementation of resistors, capacitors, diodes, transistors and MOSFET. Related topics such as delays, cross-talk, parasitics, temperature effects are included.
Antirequisite(s):
Prerequisite(s): ES 1021A/B, ECE 2233A/B, ECE 2236A/B, ECE 2240A/B, ECE 2241A/B, ECE 2277A/B, or ES 1021A/B, ECE 2238A/B, ECE 2277A/B and successful completion of the second year of the Electrical or Computer Engineering program or Integrated Engineering Program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 3370A/B - Communication Electronics I
This course deals with fundamental principles of wireless RF communications, AM, FM, and PM modulation, demodulation and spectra, and frequency shifting and mixing. Practical linear and nonlinear circuits for a heterodyne radio receiver are studied, including RF/IF amplifiers, matching networks, oscillators, mixers, modulators, demodulators, and phased-locked loops.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 3374A/B - Introduction to Electronics for Mechanical Engineering
This course is an introduction to the electronics used to collect data and analyse and control mechanical and electrical systems. The first half of the course introduces basic electronic components, while the second half focuses on higher-level hardware used in data acquisition, sensor integration and motor control applications.
Antirequisite(s):
Prerequisite(s): ECE 2274A/B or the former ECE 3373A/B or ECE 2238A/B.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 3375A/B - Microprocessors and Microcomputers
Basic elements of computers: central processing unit; memories; input/output devices; interfacing, software and hardware design, Computer Assisted Design; data handling and process control equipment; applications of microprocessors.
Antirequisite(s):
Prerequisite(s): ECE 2277A/B or the former ECE 3339A/B.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 3380A/B - Advanced Digital Systems
Memory units, coders, decoders, adders, multipliers, clocks, synchronous and asynchronous sequential circuits, algorithmic state machines, microprogrammed synthesis of ASM designs, advanced microprocessor organization.
Antirequisite(s): The former ECE 4434A/B.
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 3389A/B - Computer System Design
Introduction to computer system design and the architecture of modern high-performance computers. Memory hierarchy. RISC, superscalar, and multi-core architectures. Microprogrammed and hardwired control implementations. Students will complete group design projects integrating these concepts.
Antirequisite(s):
Prerequisite(s): ECE 3375A/B, ECE 3380A/B, or the former ECE 4434A/B.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 3390A/B - Hardware/Software Co-Design
Modern design techniques for embedded, wireless, and mobile computing systems. Unified approach to hardware and software design. Partitioning of systems into hardware and software. Hardware/software interface design. Trade-offs in hardware and software partitioning.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4415 - Computer Engineering Design Project
Selection and investigation of a computer engineering problem. Analytical and/or experimental work is carried out by project groups under the supervision of a faculty member. Progress report and a final engineering report are prepared. Each student must deliver a public oral presentation.
Antirequisite(s):
Prerequisite(s): Completion of third year of the Computer Engineering program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 6 laboratory hours, 1.0 course
 Electrical and Computer Engineering 4416 - Electrical/Computer Engineering Project
Selection and investigation of an engineering problem. Analytical and/or experimental work is carried out by individual students or project groups under the supervision of a faculty member. Progress reports and a final engineering report are prepared; each student must deliver a public lecture.
Antirequisite(s):
Prerequisite(s): Completion of third year of the Electrical, Computer or Integrated Engineering programs.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 6 laboratory hours, 1.0 course.
 Electrical and Computer Engineering 4429A/B - Advanced Digital Signal Processing
Digital Signal Processing (DSP) is widely used in speech and audio processing, biomedical engineering, and telecommunication applications. The objectives of this course are to strengthen the students' knowledge of DSP fundamentals, to introduce them to advanced DSP topics, and to familiarize them with the practical aspects of DSP algorithm implementation.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 4430A/B - Selected Topics in Electrical Engineering I
The course deals with topics of current interest in Electrical Engineering. Topics and course outlines will be available at the time of registration.
Antirequisite(s):
Prerequisite(s): Completion of third year of the Electrical or Computer Engineering programs.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 2 lecture hours and 2 laboratory hours, or 3 lecture hours and 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 4431A/B - Selected Topics in Electrical Engineering II
The course deals with topics of current interest in Electrical Engineering. Topics and course outlines will be available at the time of registration.
Antirequisite(s):
Prerequisite(s): Completion of third year of the Electrical or Computer Engineering programs.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 2 lecture hours, 2 laboratory hours, or 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 4432A/B - Radiation and Propagation
EM radiation principles; EM wave propagation, wave polarization, reciprocity theorem, antenna properties, dipole antennas; reflection from the ground; waveguides and transmission lines, impedance matching, antenna arrays, selected topics.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4433A/B - Digital Communications Systems
Transceiver design for digital communication systems, design goals and tradeoffs. Deterministic and random signals. Digital modulation techniques, optimal receiver design, performance analysis under noisy conditions. Digital communication through bandlimited channels. Characteristics of wireless channel, intersymbol interference, channel estimation, adaptive equalization. Synchronization techniques. Multiple access techniques, CDMA, TDMA, FDMA. Principles of OFDM, cyclic prefix, in-band pilots, PAPR, applications of OFDM.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4436A/B - Networking: Principles, Protocols, and Architecture
Introduction to networking, network architecture and protocols, layering, OSI and TCP/IP models. Physical layer: transmission media, data encoding, Asynchronous and synchronous transmission. Data link layer: error detection, flow control, error control. Packet Switching: datagrams, virtual circuits, routing, congestion control, internetworking. Local area networks, network layer and transport layer.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 2 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4437A/B - Communications Theory
Introduction to communication systems and information theory. Classification of signals and systems. Fourier series and transform applications. Power spectra and spectral density. Band-limited signals and noise. Sampling theory and digital transmission. Modulation techniques; pulse code modulation. Selected topics.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 tutorial hour, 0.5 course.
 Electrical and Computer Engineering 4438A/B - Advanced Image Processing and Analysis
This course explores a few major areas of digital image processing at an advanced level, with primary emphasis on medical applications.  Topics covered include image filtering and enhancement, visualization, image segmentation and image registration. Examples will be presented to give the students exposure to real-world applications in medicine and other applications.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4439A/B - Conventional, Renewable and Nuclear Energy
Global energy resources, distribution and consumption. Sustainability. Principles of operation and control of thermal, nuclear, thermal and hydroelectric, photovoltaic solar and wind power plants. Distributed Generation (DG) and renewable energy technologies. Grid integration of distributed generation.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4445A/B - Introduction to Digital Image Processing
This course covers the fundamentals of digital image processing, including image representation, histograms, contrast enhancement, geometric operations, registration, digital filtering and segmentation. Emphasis is placed on implementation of algorithms and on practical applications in industry, science and medicine.
Antirequisite(s): MEDBIO 4445A/B
Prerequisite(s): ECE 3331A/B
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4451A/B - Advanced Topics in Wireless Communications
The objective is to examine in-depth the practice of analog and digital communications. Fundamentals of wireless communication electronics are considered. A number of existing systems, including 2G/3G wireless systems, satellite communication systems, radio and TV broadcasting, and others are reviewed. Design aspects of wireless communications systems.
Antirequisite(s):
Prerequisite(s): ECE 3370A/B, ECE 4432A/B, ECE 4437A/B, Statistical Sciences 2141A/B, Applied Mathematics 3415A/B and completion of the third year of the Electrical Engineering program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 2 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4455A/B - Biomedical Systems Analysis
An introduction to biomedical engineering organized around applications of linear and control systems analysis to the dynamics of physiological systems and their responses to diagnostic and therapeutic interventions. Emphasis will be placed on respiratory, cardiovascular, and neuromuscular physiology and interactions of those systems with medical devices.
Antirequisite(s): MEDBIO 4455A/B
Prerequisite(s): (ECE 2233A/B or MSE 2233 A/B) and ECE 3330A/B
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4456A/B - Power System Protection
To allow students to: a) gain an understanding of the basic principles of protective relays and b) have a practical understanding of protection schemes for electrical power systems and equipment.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 4457A/B - Power Electronics
The use of power semiconductor devices in converter structures (topologies) to process and control the flow of electric energy. The aim of the course is to familiarize students with various power electronic converter topologies and their applications.
Antirequisite(s):
Prerequisite(s): ECE 2233A/B and ECE 3333A/B, or MSE 2233A/B and registration in the fourth year of the Mechatronic Systems Engineering program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 3 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4460A/B - Real-Time and Embedded Systems
Review of embedded processors, memory systems, basic peripherals; real-time kernel configurations, task control blocks, interrupt service routines, real-time clocks/timers, multi-tasking, schedulability analysis, inter-task communication, signals, message queues, cooperative/pre-emptive multi-tasking, priority scheduling, priority inversion problems, timing considerations, deadline handing, input-output handling; practical issues in computer control; design, development, and testing techniques.
Antirequisite(s):
Prerequisite(s): Computer Science 1027A/B or 1037A/B, ECE 3375A/B, and successful completion of the third year of an Engineering program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.
 Electrical and Computer Engineering 4464A/B - Electric Power Systems II
Power flow studies; symmetrical faults; symmetrical components; unsymmetrical faults; power system stability; Introduction to High Voltage DC (HVDC) Transmission and Flexible AC Transmission Systems (FACTS).
Antirequisite(s):
Prerequisite(s):
Corequisite(s): Applied Mathematics 3415A/B
Pre-or Corequisite(s):
Extra Information: 3 Lecture hours/week, 1 Tutorial hour/ week; 1 lab hour/week, 0.5 course.
 Electrical and Computer Engineering 4468A/B - Systems Optimization
Engineering problems as optimization problems. Single-variable optimization. Multi-variable unconstrained optimization. Advanced techniques for unconstrained optimization. Equality and inequality constraints and optimality criteria. Techniques for constrained optimization. Linear programming.
Antirequisite(s):
Prerequisite(s):
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 0.5 course.
 Electrical and Computer Engineering 4469A/B - Applied Control Systems
The course covers analytical methods for analyzing and developing control strategies for industrial processes. These include identification and empirical modeling, tuning of PID controller, digital control systems, z-transformation. PLCs are discussed. Computer based simulation modules using Matlab^® and Simulink^® reused. Examples from different engineering disciplines are studied.
Antirequisite(s):
Prerequisite(s): ECE 3331A/B, ECE 3330A/B as well as successful completion of the third year of the Engineering program.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hour, 0.5 course.
 Electrical and Computer Engineering 4470A/B - Microcomputer Engineering
Introduction to computer system design. x86 and m68k microcomputer architectures. Assembly language programming. Cross-compiler development. Object-oriented analysis and design for embedded microcomputer systems. Advanced interfacing topics. Applications-level development. Systems programming on embedded systems (Palm Programming).
Antirequisite(s):
Prerequisite(s): ECE 2277A/B or the former ECE 3339A/B, ECE 3375A/B.
Corequisite(s):
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours or tutorial hours, 0.5 course.
 Electrical and Computer Engineering 4480A/B - Very Large Scale Integration and Microelectronics
Introduction to microelectronic circuits and VLSI systems. Theory of semiconductors. Very Large Scale Integrated System: Integration of electronic circuits, Moore's Law, hierarchical and structured design. Layer technique of circuit design: abstract circuits, layer design, colour codes, STYX diagrams. Implementation of inverters and gates.
Antirequisite(s):
Prerequisite(s): ECE 2277A/B, ECE 3349A/B, ECE 3375A/B, completion of the third year of the Computer Engineering program
Corequisite(s): ECE 4434A/B.
Pre-or Corequisite(s):
Extra Information: 3 lecture hours, 1.5 laboratory hours, 0.5 course.